346 Configuring Security FeaturesSecurity Options for the iDRAC6 AdministratorDisabling the iDRAC6 Local ConfigurationAdministrators can disable local configuration through the iDRAC6 graphicaluser interface (GUI) by selecting Remote Access Network/Security Services.When the Disable the iDRAC Local Configuration using option ROM checkbox is selected, the iDRAC6 Configuration Utility—accessed by pressing during system boot—operates in read-only mode, preventing localusers from configuring the device. When the administrator selects the Disablethe iDRAC Local Configuration using RACADM check box, local users cannotconfigure the iDRAC6 through the RACADM utility, or the Dell OpenManageServer Administrator, although they can still read the configuration settings.Administrators can enable one or both of these options at the same time.In addition to enabling them through the Web-based interface,administrators can do so using local RACADM commands.Disabling Local Configuration During System RebootThis feature disables the ability of the managed system’s user to configure theiDRAC6 during system reboot.racadm config -g cfgRacTuning -ocfgRacTuneCtrlEConfigDisable 1NOTE: This option is supported only on the iDRAC6 Configuration Utility. To upgradeto this version, upgrade your BIOS using the BIOS update package from the DellSupport website at support.dell.com.Disabling Local Configuration From Local RACADMThis feature disables the ability of the managed system’s user to configure theiDRAC6 using the local RACADM or the Dell OpenManage ServerAdministrator utilities.racadm config -g cfgRacTuning -ocfgRacTuneLocalConfigDisable 1
