Configuring the iDRAC6 Using the Web Interface 73Configuring and Managing Generic LDAPiDRAC6 provides a generic solution to support Lightweight Directory AccessProtocol (LDAP)-based authentication. This feature does not require anyschema extension on your directory services. For information on configuringgeneric LDAP Directory Service, see "Generic LDAP Directory Service" onpage 178.Configuring iDRAC6 ServicesNOTE: To modify these settings, you must have Configure iDRAC permission.1 Click Remote Access Network/Security. Click the Services tab todisplay the Services configuration page.2 Configure the following services, as required:• Local Configuration — see Table 4-20• Web server — see Table 4-21 for Web server settings• SSH — see Table 4-22 for SSH settings• Telnet — see Table 4-23 for Telnet settings.• Remote RACADM — see Table 4-24 for Remote RACADM settings.• SNMP Agent — see Table 4-25 for SNMP settings.Table 4-19. Active Directory Configuration and Management Page ButtonsButton DefinitionPrint Prints the values that are displayed on the Active DirectoryConfiguration and Management page.Refresh Reloads the Active Directory Configuration and Managementpage.Configure ActiveDirectoryEnables you to configure Active Directory. See "Using theiDRAC6 Directory Service" on page 143 for detailed configurationinformation.Test Settings Allows you to test the Active Directory configuration using thesettings you specified. See "Using the iDRAC6 Directory Service"on page 143 for details on using the Test Settings option.
