Using the iDRAC6 Configuration Utility 311LAN User ConfigurationThe LAN user is the iDRAC6 administrator account, which is root by default.Press to display the LAN User Configuration submenu. When youhave finished configuring the LAN user, press to return to theprevious menu.Reset to DefaultUse the Reset to Default menu item to reset all of the iDRAC6 configurationitems to the factory defaults. This may be required, for example, if you haveforgotten the administrative user password or if you want to reconfigure theiDRAC6 from the default settings.Press to select the item. The following warning message isdisplayed:Resetting to factory defaults will restore remote Non-Volatile user settings. Continue?< NO (Cancel) >< YES (Continue) >Select YES and press to reset the iDRAC6 to the defaults.Any of the following error messages is displayed if this operation fails:• Reset command was not successful. Please try later- iDRAC is busy.LCD Error Display Select Simple or SEL (System Event Log).This feature allows error messages to be displayed on the LCDin one of two formats:The Simple format provides an English language descriptionof the event.The SEL format displays a System Event Log text stringLCD Remote VirtualConsole IndicationSelect Enabled to display the text Virtual Console whenever aVirtual Console is active on the unit.LCD Front PanelAccessPress , , and spacebar to switchbetween the options: Disabled, View And Modify, and ViewOnly.This setting defines the user access level for the LCD.
