Dell IDRAC6 User Manual

Also see for IDRAC6: User guide

Contents

Dell IDRAC6 User Manual Manual pdf 46 page image

46 Configuring the iDRAC6 Using the Web InterfaceAccessing the Web InterfaceTo access the iDRAC6 Web interface, perform the following steps:1 Open a supported Web browser window.To access the Web interface using an IPv4 address, go to step 2.To access the Web interface using an IPv6 address, go to step 3.2 Access the Web interface using an IPv4 address; you must haveIPv4 enabled:In the browser Address bar, type:https://Then, press .3 Access the Web interface using an IPv6 address; you must have IPv6enabled.In the browser Address bar, type:https://[]Then, press .4 If the default HTTPS port number, port 443, has been changed, type:https://:where iDRAC-IP-address is the IP address for theiDRAC6 and port-number is the HTTPS port number.5 In the Address field, type https://< iDRAC-IP-address > and press.If the default HTTPS port number (port 443) has been changed, type:https://<iDRAC-IP-address>:>where iDRAC-IP-address is the IP address for the iDRAC6 andport-number is the HTTPS port number.The iDRAC6 Login window is displayed.