Using the System Setup Program 4-3You can also enter the System Setup program byresponding to certain error messages. (See “Respondingto Error Messages” at the end of this chapter.)The following sections describe the System Setup cate-gories in the Main, Advanced, Security, and Exit menus.Main Menu CategoriesTo access the Main menu (see Figure 4-1), use the arrowkeys to highlight Main. This section explains in detaileach of the System Setup categories in the Main menuand Boot Sequence submenu.Figure 4-1. Main Menu of the System Setup ProgramF1 Help Select Item -/+ Change Values F9 Setup DefaultsESC Exit Select Menu Enter Select Submenu F10 Previous ValuesTime: [5:01:97]Date: [May 04, 1997]Diskette Drive A: [1.44 MB, 3.5 inch]Diskette Drive B: [Not Installed]Fast Video BIOS: [On and Cached]Memory Cache: [Enable]Boot Sequence: [A: then C:]Num Lock: [On]Speaker: [On]Processor 1: Pentium II 266Processor 2: Pentium II 266Level 2 Cache: 512 KBBase Memory: 640 KBExtended Memory: 63 MBVideo Memory: 1 MBService Tag: AB12ZItem-Specific HelpDell System PowerEdge 4200 Setup BIOS Version AXXMain Advanced Security ExitResets the time on thecomputer’s internalclock. Time in kept in a24-hour format. Pressing, , or selects fieldsconfiguration options and system datatitle boxhelpkey functions
