4-10 Dell PowerEdge 4200 Systems User’s GuideSet Supervisor PasswordThe Set Supervisor Password category lets you restrictaccess to your computer’s System Setup program in thesame way that you restrict access to your system with theuser password feature.NOTE: Read “Using the Supervisor Password Feature”later in this chapter for detailed instructions on assigninga supervisor password and using, deleting, or changingan existing supervisor password. See “Disabling a For-gotten Password” found later in this chapter for informationon disabling a forgotten supervisor password.Set User PasswordNOTE: You cannot set the user password until a supervi-sor password is set.The Set User Password category lets you restrict accessto your system by setting a user password that is requiredwhen the Password on Boot category is set to Enabled.NOTE: Read “Using the User Password Feature” foundlater in this chapter for detailed instructions on assigninga user password and using, deleting, or changing anexisting user password. See “Disabling a ForgottenPassword” found later in this chapter for information ondisabling a forgotten user password.Password on BootThe Password on Boot category allows you to require auser password during the boot routine when the categoryis set to Enabled. The default is Disabled.Diskette AccessThe Supervisor setting restricts access of diskette drivesto the supervisor only. The User setting (the default)allows access to the supervisor and the user.System Backup ReminderThis category lets you display a message during the bootroutine at selected intervals to remind you to back up thesystem. The options are as follows:• Disabled (default)• Daily• Weekly• MonthlyVirus Check ReminderThis category lets you display a message during the bootroutine at selected intervals to remind you to check yoursystem for viruses. The options are as follows:• Disabled (default)• Daily• Weekly• Monthly
