Using the System Setup Program 4-9Security Menu CategoriesTo access the Security menu (see Figure 4-4), use thearrow keys to highlight Security. The following sub-sections describe the System Setup categories in theSecurity menuSupervisor Password IsThis category indicates whether the supervisor passwordis disabled or enabled. When Enabled is displayed, thesupervisor password has already been set and is requiredfor full access to the System Setup program (seeTable 4-2). The default is Disabled.User Password IsThis category indicates whether the user password is dis-abled or enabled. When Enabled is displayed, the userpassword has already been set and is required during theboot routine. Unlike the supervisor password, the userpassword does not allow you full access to the SystemSetup program (see Table 4-2 later in this chapter). Thedefault is Disabled.Figure 4-4. Security Menu of the System Setup ProgramMain Advanced Security ExitSupervisor Password is DisabledUser Password is DisabledSet Supervisor Password [Press Enter]Set User Password [Press Enter]Password on boot [Disabled]Diskette access [User]System backup reminder [Disabled]Virus check reminder [Disabled]Item-Specific HelpBIOS Version AXXF1 Help Select Item -/+ Change Values F9 Setup DefaultsESC Exit Select Menu Enter Select Submenu F10 Previous ValuesDell System PowerEdge 4200 SetupPressing <ENTER> displaysa dialog box for enteringthe supervisor (7-digit,alphanumeric) password.This password gives fullaccess to the Setup menu.The supervisor passwordmust be enabled beforethe user password can beset.
