16 About the Command Line InterfaceCLI CommandsThis section lists the CLI commands you can use to perform thefollowing functions:• Identify storage arrays• Set passwords• Add storage arrays• Specify communication parameters• Enter individual script configuration commands• Specify a file containing script configuration commandsThe following are general forms of the CLI commands, showing theparameters and terminals used in each command. Table 1-1 lists definitionsfor the parameters shown in the CLI commands.SMcli host-name-or-IP-address [host-name-or-IP-address] [-c "command; {command2};"][-n storage-array-name | -w WWID][-o outputfile][-p password][-e][-S]SMcli host-name-or-IP-address[host-name-or-IP-address] [-f scriptfile][-n storage-array-name | -w WWID][-o outputfile] [-p password] [-e] [-S]Table 1-1. Command Name ConventionsParameter Definitiona|b pipe symbol indicating alternative ("a" or "b")italicized-words terminals[...] (square brackets) zero or one occurrence{...} (curly brackets) zero or more occurrences<...> (angle brackets) occurrence exceeds maximum limit of 30 characters(a|b|c) choose only one of the alternativesbold terminals
