Script Commands 199ParametersSet Physical Disk StateThis command sets a physical disk to the Failed state. (To return a physicaldisk to the optimal state, use the revive physicalDisk command.)Syntaxset (physicalDisk [enclosureID,slotID] |physicalDisks [enclosureID1,slotID1 enclosureID2,slotID2 ... enclosureIDn,slotIDn])operationalState=failedParameterParameter DescriptionphysicalDisk orphysicalDisksThe tray and the slot where the physical diskresides. Tray ID values are 0 to 99. Slot ID valuesare 0 to 31. Enclose the tray ID values and theslot ID values in square brackets ([ ]).hotSpare The setting to assign the physical disk as the hotspare. To assign the physical disk as the hot spare,set this parameter to TRUE. To remove a hotspare assignment from a physical disk, set thisparameter to FALSE.Parameter DescriptionphysicalDisk orphysicalDisksThe tray and the slot where the physical diskresides. Tray ID values are 0 to 99. Slot ID valuesare 0 to 31. Enclose the tray ID values and theslot ID values in square brackets ([ ]).
