Script Commands 191ParametersSet HostThis command assigns a host to a host group or moves a host to a differenthost group. You can also create a new host group and assign the host to thenew host group with this command. The actions performed by this commanddepend on whether the host has individual mappings or does not haveindividual mappings.Syntaxset host [hostName]hostGroup=("hostGroupName" | none | defaultGroup)userLabel="newHostName"hostType=(hostTypeIndexLabel |hostTypeIndexNumber)ParametersParameter DescriptionphysicalDisk orphysicalDisksThe tray and the slot where the physical diskresides. Tray ID values are 0 to 99. Slot ID valuesare 0 to 31. Enclose the tray ID values and theslot ID values in square brackets ([ ]).allPhysicalDisks Selects all the physical disks.Parameter Descriptionhost The name of the host that you want to assign to a host group.Enclose the host name in square brackets ([ ]). If the host name hasspecial characters, you must also enclose the host name in doublequotation marks (" ").hostGroup The host group to which you want to assign the host. (The followingtable defines how the command runs if the host does or does nothave individual virtual disk-to-LUN mappings.) Enclose the hostgroup name in double quotation marks (" "). The defaultGroup isthe host group that contains the host to which the virtual disk ismapped.
