200 Script CommandsSet RAID Controller ModuleThis command defines the attributes for the RAID controller modules.Syntaxset controller [(0 | 1)]availability=(online | offline | serviceMode) |ethernetPort [(1 | 2)]=ethernetPortOptions |globalNVSRAMByte [nvsramOffset]=(nvsramByteSetting |nvsramBitSetting) |hostNVSRAMByte [hostType, nvsramOffset]=(nvsramByteSetting |nvsramBitSetting) |IPv4GatewayIP=ipAddress |IPv6RouterAddress=ipv6Address |iscsiHostPort [(1 | 2 | 3 | 4)]=iscsiHostPortOptionsrloginEnabled=(TRUE | FALSE) |serviceAllowedIndicator=(on | off)ParametersParameter Descriptioncontroller The RAID controller module for which you want todefine properties. Valid identifiers for the RAIDcontroller module are 0 or 1, where, 0 is the RAIDcontroller module in slot 0, and 1 is the RAIDcontroller module in slot 1. Enclose the identifierfor the RAID controller module in square brackets([ ]). If you do not specify a RAID controllermodule, the firmware for the RAID controllermodule returns a syntax error.availability The mode for the RAID controller module, whichyou can set to online, offline, or serviceMode(service).
