Script Commands 165The RAID controller module firmware creates a lock that restricts access tothe SED physical disks. SED physical disks have a state called SecurityCapable. When you create a security key, the state is set to Security Enabled,which restricts access to all SED physical disks that exist within the storagearray.Enable RAID Controller Module Data TransferThis command revives a RAID controller module that quiesces while runningdiagnostics.Syntaxenable controller [(0 | 1)] dataTransferParameterEnable Storage Array FeatureThis command enables a premium feature using a feature key file.Syntaxenable storageArray [featurePack | feature]file=”filename”Parameter Descriptioncontroller RAID controller module that you want torevive. Valid RAID controller moduleidentifiers are 0 or 1, where, 0 is the RAIDcontroller module on the left and 1 is theRAID controller module on the rightwhen viewed from the rear of theenclosure. You must put brackets ([ ])around the RAID controller moduleidentifier. If you do not specify a RAIDcontroller module, the storagemanagement software returns a syntaxerror.
