246 Script CommandsStart Configuration Database DiagnosticThis command starts a diagnostic test to validate the configuration databasein the controller firmware.SyntaxStart storageArray configDbDiagnosticParametersNone.NotesUpon completion of the diagnostic test, the controller firmware returns oneof these results:• Diagnosis completed without errors. No ZIP filecreated.• Diagnosis completed with errors. Refer to the ZIPfile created at:...\Install_dir\data\FirmwareUpgradeReports\timestamp_buildNo.zipIf the diagnostic test detects an inconsistency in the configuration database,the controller firmware performs these actions:• Returns a description of the inconsistency• Saves a ZIP file containing raw binary dataThe controller firmware saves the ZIP file to this location:...\Install_dir\data\FirmwareUpgradeReports\timestamp_buildNo.zipThe binary data can be used to help determine the cause of the problem, orthe file containing the binary data can be sent to a Customer and TechnicalSupport representative.To stop the database configuration diagnostic test, use the stopstorageArray configDbDiagnostic command.
