180 Script CommandsParameterRevive Physical DiskThis command forces the specified physical disk to the optimal state.CAUTION: Correct use of this command depends on the data configuration on allphysical disks in the disk group. Never attempt to revive a physical disk unlesssupervised by a Technical Support representative.Syntaxrevive physicalDisk [enclosureID,slotID]ParameterSave Enclosure Log DataThis command saves the enclosure log sense data to a file. Log sense data ismaintained by the environmental cards for each enclosure. Not all of theenvironmental cards contain log sense data.Syntaxsave allEnclosures logFile="filename"ParameterParameter DescriptiondiskGroup Number of the disk group to be set to the optimal state. Youmust put brackets ([ ]) around the disk group number.Parameter DescriptionphysicalDisk Identifies the enclosure and slot where, the physical diskresides. Enclosure ID values are 0 to 99. Slot ID values are 0to 31. You must put brackets ([ ]) around the enclosure IDvalue and the slot ID value.Parameter DescriptionlogFile Name of the file to which to save the log sense data. Youmust put quotation marks (" ") around the file name.
