| 
4-4 Dell Workstation Midsize Systems User’s GuideFigure 4-1. ICU WindowYou can maneuver through each menu and dialog boxusing a mouse. If a mouse is not available, you can usethe keys shown in Table 4-1.Each menu and menu option has an underlined characterin its name; when you press the key in conjunctionwith the key for the underlined character, that menu ormenu option is selected.Adding a Listed CardNOTE: If you want to add a configuration file that youreceived on diskette with a new expansion card, you mustcopy the configuration file to the \db subdirectory on thebackup copy of the ICU diskette. You should then rebootyour system and perform the following procedure to addthe expansion card.Use the following procedure to add a listed card with theICU:1. Start the ICU as described in “Starting the ICU”found earlier in this chapter.2. From the ICU window, click Add or select AddCard from the Configure menu.3. Click the name of the category of card that youwant to add. If you clicked Add in step 2, clickOK.A dialog box like the one in Figure 4-2 appears list-ing the names of all available cards of that type.Figure 4-2. Add Network Card Dialog Box4. Select the name of the card you want to add.If the card is not listed, see “Adding an UnlistedCard” found next in this chapter.5. If you want the ICU to select the resources for thecard, click OK. Otherwise, skip to step 6.The ICU uses the default resources set by the cardmanufacturer whenever possible. If the ICU cannotfind a resource that is valid for the card and availablein the system, the utility generates an error message.See Appendix C, “ISA Configuration UtilityMessages,” for an explanation of the message and apossible solution to the conflict.If you are satisfied with the default resourcesassigned to the card, you can skip the remainder ofthis procedure.Table 4-1. ICU KeysKeys Action<x><y> Displays the menu containingthe underlined letter x andperforms the operation indi-cated by the menu itemcontaining the underlined let-ter y. For example, to save afile (that is, to display the Filemenu and select the Savemenu option), press and . Moves from one controlbutton or list to another.Up- anddown-arrow keysMoves up and down throughitems in a list. Highlights an item in a list. Selects the highlighted buttonor item in a list. |
