Services Configuration | 187Services > PoliciesThe Services > Policies page within the Web-based management interface provides a singleinterface for viewing service policies and access to configure policies for users and groups.Adding a PolicyTo add a policy, navigate to the Services > Policies screen within the management interfaceand select the Add Policy... button. The Add Policy window opens.Administrators can follow the following steps to add a service policy:Step 1 Use the Policy Owner drop-down menu to select whether the policy is owned as a GlobalPolicy, a Local Domain group policy, or a policy assigned to an individual User.Step 2 In the Apply Policy To drop-down menu, select whether the policy will be applied to anindividual host, a range of addresses, all addresses, a network object, a server path, or a URLobject. You can also select an individual IPv6 host, a range of IPv6 addresses, or all IPv6addresses. The Add Policy dialog box changes depending on what type of object you selectin the Apply Policy To drop-down list.Note These SRA policies apply to the destination address(es) of the SRA connection, notthe source address. You cannot permit or block a specific IP address on the Internetfrom authenticating to the SRA gateway with a policy created on the Policies tab.However, it is possible to control source logins by IP address with a login policy createdon the user's Login Policies tab. For more information, refer to “Configuring LoginPolicies” section on page 312.
