Command Line Interface | 417Appendix FCommand Line InterfaceThe Command Line Interface (CLI) is a text-only mechanism for interacting with a computeroperating system or software by typing commands to perform specific tasks. It is a critical partof the deployment of the SRA Virtual Appliance, where basic networking needs to be configuredfrom the console. The CLI is also supported on the SRA 4600, 4200, 1600, and 1200appliances.While the SRA physical appliance products have a default IP address and networkconfiguration that requires a client’s network settings to be reconfigured to connect, the networksettings in an existing VMware virtual environment might conflict with the SRA appliancedefaults. The CLI utility remedies this by allowing basic configuration of the network settingswhen deploying the SRA Virtual Appliance.Note The Dell SonicWALL SRA 6.0 CLI allows configuration of only the X0 interface on the SRA4600/4200/1600/1200 or SRA Virtual Appliance.For the SRA physical appliances, console access is achieved by connecting a computer to theserial port. Use the following settings:• Baud: 115200• Data Bits: 8• Parity: None• Stop Bits: 1For the SRA Virtual Appliance, the following login prompt is displayed after the firmware hasfully booted:,,,,,,,,,,,,,,,,,,mmbbbbbb11111111111111111111111bbbbbmm,,,,,,b||PPPPPPP||''''''''''''''''|PPPPPPPPP111111111111bbm,,'''''' '''''PPPP111111111bm,'''PP1111111bm,'PP111111b,|111111:.1111P|.Copyright (c) 2010 SonicWALL, Inc. ,b1PP|',,||'''SonicWALL SRA Virtual Appliancesslvpn login:In the following examples, user input is highlighted in bold to indicate text entered by the user.To access the CLI, login as admin. The password is the same as the password for the adminaccount that is configured on the appliance. The default is password.
