382 | SRA 6.0 Administrator’s GuideStep 9 In the Edit Active Directory Group window, select Mega Group from the Active DirectoryGroup drop-down list and then click Edit.Mega Group is listed in the Active Directory Groups table on the AD Groups tab.Step 10 In the Edit Group Settings window, click OK.Step 11 On the Users > Local Groups page, click the Configure button in the IT_Group row. The EditGroup Settings window appears.Step 12 In the Edit Group Settings window, click the AD Groups tab and then click the Add Groupbutton.Step 13 In the Edit Active Directory Group window, select IT Group from the Active Directory Groupdrop-down list and then click Edit.IT Group is listed in the Active Directory Groups table on the AD Groups tab.Step 14 In the Edit Group Settings window, click OK.At this point, we have created the three Local Groups and associated each with its ActiveDirectory Group.Adding the SSHv2 PERMIT PolicyIn this section, we will add the SSHv2 PERMIT policy for both Acme_Group and IT_Group toaccess the 10.200.1.102 server using SSH.This procedure creates a policy for the SRA Local Group, Acme_Group, and results in SSHaccess for members of the Active Directory group, Acme Group.Repeat this procedure for IT_Group to provide SSH access to the server for members of theActive Directory group, IT Group.Step 1 On the Users > Local Groups page, click the Configure button in the Acme_Group row. TheEdit Group Settings window appears.Step 2 In the Edit Group Settings window, click the Policies tab.Step 3 On the Policies tab, click Add Policy.Step 4 In the Add Policy window, select IP Address in the Apply Policy To drop-down list.Step 5 In the Policy Name field, enter the descriptive name, Allow SSH.Step 6 In the IP Address field, enter the IP address of the target server, 10.202.1.102.Step 7 In the Services drop-down list, select Secure Shell Version 2 (SSHv2).Step 8 In the Status drop-down list, select PERMIT, and then click Add.Step 9 In the Edit Group Settings window, click OK.
