Steps1 Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.2 Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.3 Connect the battery cable to the system board.Next steps1 Installing the base cover.2 Installing the SD memory card.3 Follow the procedure in After working on your thin client.Memory modulesRemoving the memory modulePrerequisites1 Follow the procedure in Before working on your thin client.2 Removing the SD memory card.3 Removing the base cover.4 Removing the battery.About this taskThe following image indicates the location of the memory module and provides a visual representation of the removal procedure:18 Removing and installing components
