Steps1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and insert the solid-state drive at an angle into thesolid-state drive slot.2 Replace the screw (M2x2) that secures the solid-state drive to the palm-rest and keyboard assembly.3 Align and replace the thermal plate on the solid-state drive slot.4 Replace the screw (M2x3) that secures the thermal plate to the palm-rest and keyboard assembly.Next steps1 Installing the battery.2 Installing the base cover.3 Installing the SD memory card.4 Follow the procedure in After working on your thin client.SpeakersRemoving the speakersPrerequisites1 Follow the procedure in Before working on your thin client.2 Removing the SD memory card.3 Removing the base cover.4 Removing the battery.22 Removing and installing components
