Steps1 Remove the screw (M2x3) that secures the WLAN card bracket to the system board.2 Disconnect the antenna cables from the connectors on the WLAN card.3 Peel off the tape that secures the antenna cables to the system board.4 Lift and remove the WLAN card bracket that secures the antenna cables.5 Slide and remove the WLAN card from the WLAN slot.Installing the WLAN cardPrerequisiteIf you are replacing a component, remove the existing component before performing the installation procedure.About this taskThe following image indicates the location of the WLAN card and provides a visual representation of the installation procedure:Removing and installing components 27
