Option DescriptionThe options are:• Adaptive—Default• Standard - Fully charges your battery at a standard rate.• ExpressCharge- The battery charges over a shorter period using Dell’s fast charging technology.• Primarily AC use• CustomIf Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.NOTE: All charging mode may not be available for all the batteries. To enable this option,disable the Advanced Battery Charge Configuration option.Post behaviorTable 11. POST BehaviorOption DescriptionAdapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain poweradapters.• Enable Adapter Warnings—DefaultNumlock Enable The option specifies if the Numlock function should be enabled when the system boots.The option is set by default.Fn Lock Options Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between theirstandard and secondary functions. If you disable this option, you cannot toggle dynamically the primarybehavior of these keys.• Fn Lock—DefaultClick one of the following options:• Lock Mode Disable/Standard• Lock Mode Enable/Secondary—DefaultFastboot Allows you to speed up the boot process by bypassing some of the compatibility steps.Click one of the following options:• Minimal• Thorough—Default• AutoExtend BIOS POST Time Allows you to create an additional preboot delay.Click one of the following options:• 0 seconds—Default• 5 seconds• 10 secondsFull Screen Logo Allows you to display full screen logo, if your image matches screen resolution.• Enable Full Screen LogoSystem setup 73