Steps1 Align the notch on the memory module with the tab on the memory module slot.2 Slide the memory module firmly into the slot at an angle.3 Press the memory module down until the clips secure it.NOTE: If you do not hear the click, remove the memory module and reinstall it.Next steps1 Installing the battery.2 Installing the base cover.3 Installing the SD memory card.4 Follow the procedure in After working on your thin client.Solid-state driveRemoving the M.2 solid-state drivePrerequisites1 Follow the procedure in Before working on your thin client.2 Removing the SD memory card.3 Removing the base cover.4 Removing the battery.About this taskThe following image indicates the location of the M.2 solid-state drive and provides a visual representation of the removal procedure:20 Removing and installing components
