3 Removing the base cover.4 Removing the battery.About this taskThe following image indicates the location of the heat sink and provides a visual representation of the removal procedure:Steps1 In the reverse sequential order (6, 5, 4, 3, 2, 1), loosen the six captive screws (M2x3) that secure the heat sink to the system board.2 Carefully lift the heat sink and place it away from the system.Installing the heat sinkPrerequisiteIf you are replacing a component, remove the existing component before performing the installation procedure.About this taskThe following image indicates the location of the heat sink and provides a visual representation of the installation:Removing and installing components 45