Steps1 Align the notch on the WLAN card with the tab on the WLAN card slot and insert the WLAN card at an angle into the WLAN card slot.2 Connect the antenna cables to the WLAN card.3 Adhere the tape that secures the antenna cables to the system board.4 Align and place the WLAN card bracket on the WLAN card.5 Replace the screw (M2x3) to secure the WLAN card bracket to the WLAN cardNext steps1 Installing the battery.2 Installing the base cover.3 Installing the SD memory card.4 Follow the procedure in After working on your thin client.IO boardRemoving the IO boardPrerequisites1 Follow the procedure in Before working on your thin client.2 Removing the SD memory card.3 Removing the base cover.4 Removing the battery.5 Removing the CAC reader.About this taskThe following image indicates the location of the I/O board and provides a visual representation of the removal procedure:28 Removing and installing components