ud::once:/sbin/updateud::once:/sbin/update#Trap CTRL-ALT-DELETEca::ctrlaltdel:/sbin/shutdown -t3 -r now#When our UPS tells us power has failed, assume we have a few#minutes of power left. Schedule a shutdown for 2 minutes from now.#This does, of course, assume you have power installed and your#UPS is connected and working correctly.pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"#If power was restored before the shutdown kicked in, cancel it.pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"#Run gettys in standard runlevelsco:2345:respawn:/sbin/agetty -h -L 57600 ttyS1 ansi1:2345:respawn:/sbin/mingetty tty12:2345:respawn:/sbin/mingetty tty23:2345:respawn:/sbin/mingetty tty34:2345:respawn:/sbin/mingetty tty45:2345:respawn:/sbin/mingetty tty56:2345:respawn:/sbin/mingetty tty6#Run xdm in runlevel 5#xdm is now a separate servicex:5:respawn:/etc/X11/prefdm -nodaemonIn the file /etc/securetty add a new line with the name of the serial tty for COM2:ttyS1The following example shows a sample file with the new line.NOTE: Use the Break Key Sequence (~B) to execute the Linux Magic SysRq key commands on serial console using IPMITool.vc/1vc/2vc/3vc/4vc/5vc/6vc/7vc/8vc/9vc/10vc/11tty1tty2tty3tty4tty5tty6tty7tty8tty9tty10tty11ttyS1Supported SSH cryptography schemesTo communicate with iDRAC using SSH protocol, it supports multiple cryptography schemes listed in the following table.122
