Interface or Protocol DescriptionFor more information, see the following:• Lifecycle Controller-Remote Services User’s Guide available at dell.com/idracmanuals.• Lifecycle Controller Integration Best Practices Guide available at dell.com/support/manuals.• Lifecycle Controller page on Dell TechCenter — delltechcenter.com/page/Lifecycle+Controller• Lifecycle Controller WS-Management Script Center — delltechcenter.com/page/Scripting+the+Dell+Lifecycle+Controller• MOFs and Profiles — delltechcenter.com/page/DCIM.Library• DTMF website — dmtf.org/standards/profiles/iDRAC port informationThe following ports are required to remotely access iDRAC through firewalls. These are the default ports iDRAC listens to forconnections. Optionally, you can modify most of the ports. To do this, see Configuring services.Table 4. Ports iDRAC listens for connectionsPort Number Function22* SSH23* Telnet80* HTTP443* HTTPS623 RMCP/RMCP+161* SNMP5900* Virtual Console keyboard and mouse redirection, Virtual Media, Virtual Folders, and Remote FileShare5901 VNCWhen VNC feature is enabled, the port 5901 opens.* Configurable portThe following table lists the ports that iDRAC uses as a client.Table 5. Ports iDRAC uses as clientPort Number Function25* SMTP53 DNS68 DHCP-assigned IP address69 TFTP162* SNMP trap28
