Delta eZV-440 Application Manual

Contents

Delta eZV-440 Application Manual Manual pdf 13 page image

About the enteliZONE ORCAview Configuration GraphicPage 12 of 84 eZV-440 Application GuideEdition 2.6Method 1 (Recommended)1. In the left window of the ORCAview navigator, right-click on the enteliZONE controller youwant to configure and click Open.If this is your first time using the configuration graphic, the DEV object dialog opens.2. On the Configuration tab, click and browse to the graphics folder and select the Main.gpc filefor the enteliZONE controller. Click OK.3. In the left window of the ORCAview navigator, right-click on the enteliZONE controller again.Click Open. Because you have set it up in step 2, the configuration graphic window shouldopen and will open this way each time you select Open from the right-click menu.Right-clicking does not work if you have changed the name of the configurationgraphic file or if the Controller Graphic field in the Device object (in the controllerdatabase) has been edited.Method 21. In the left window of the ORCAview navigator, open the Graphics folder and double-click onone of the configuration files. A new graphic window opens. You can access all theconfiguration files from this window.2. In the numerical field at the top of the window, enter the BACnet address of the enteliZONEcontroller you want to configure and click Connect.Working with the ORCAview Configuration GraphicThis graphic is interactive and dynamic in real-time. When you select an option in a field, other fieldsand options are displayed in response to the initial option selected. What this also means is that anychanges made to the fields are saved and applied instantly.Selecting Between Multiple ControllersIf you have multiple enteliZONE controllers of the same kind on the same network, instead ofopening the configuration graphic individually for each controller in the ORCAview navigator, youcan switch between controllers within the configuration graphic.When you switch between controllers, any changes made in a previous session will besaved automatically before you switch to the next controller.