eZV-440 Application GuideEdition 2.6Page 13 of 84To select between multiple controllers:In the numerical field at the top of the window, enter the BACnet address of the enteliZONEcontroller you want to configure and click Connect.Save to Flash, Save to PC and Load from PCThese buttons are displayed at the top of the configuration graphic dialog. They minimize the needto switch between the configuration graphic and the ORCAview Navigator when you are workingwith multiple controllers.The Save to Flash button is used to save the controller database to the controller’s flash memory.The Save to PC button is used to save the controller database .pdb file to your computer.The Load from PC button is used to load a controller database .pdb file from your computer ontothe enteliZONE controller.Both Save to PC and Load from PC allow you to save your configuration graphic settings and copythem onto multiple enteliZONE controllers using ORCAview.ShortcutsThere is a quick way to open the ORCAview object dialogs by right-clicking on the configured inputand output numbers in the configuration graphic.In the example below, when you right-click on the number 1 and select Open SpaceTemp_AI1,the AI1 object dialog opens onscreen.