eZV-440 Application GuideEdition 2.6Page 79 of 84Control TypesWhat are Control Types?On the Local Outputs tab of the enteliZONE configuration page, control types refer to the methodsof control used on the output device signal. The enteliZONE controllers support 5 control types:Control Types DescriptionAnalog Provides modulating control using a 0-10V analog signal.Binary Provides 2 position ON/OFF control using a TRIAC or relay output.TimeProportionedProvides modulating control for wax valves using a time-proportionedsignal.Tri-State Open Used to open a tri-state valve.Tri-State Close Used to close a tri-state valve.The control types that are available in the Control Type field drop-down list depend on the previousselection made in the Function field. For example, a binary control type would be the only controltype available if the occupancy indicator function is selected. The table below lists the outputfunctions and their associated control types.Output Function Control TypeHydronic DuctHydronic BaseboardAnalog, binary, time proportioned, tri-state open, tri state closeElectric DuctElectric BaseboardAnalog, binary, time proportionedSeries FanParallel FanAnalog, binaryVAV/VVT Damper Analog, tri-state open, tri-state closeOccupancy Indicator BinarySupply FanExhaust FanAnalog, binaryThe Control Type field is also affected by the physical output on the controller used to connect tothe output device. For example, if you are using the TRIAC physical output, the analog control typedoes not appear in the Control Type field drop-down list. The following table lists all the physicaloutputs and their associated control types.
