Denon AVC-A11XV Operating Instructions Manual

Also see for AVC-A11XV: Operating instructions Control protocol Service manual

Contents

Denon AVC-A11XV Operating Instructions Manual Manual pdf 33 page image

DISPLAYSURROUNDBACK SPEAKER30ENGLISHBasic Operation Basic OperationENGLISHSURROUNDPARAMETER7CH STEREOCURSORDSP SIMULATIONENTERDSP SIMULATIONSURROUND9CH (7CH STEREO)SURROUNDPARAMETERENTERCURSORDSP surround simulation1 Select the surround mode for each inputchannel.The surround mode switches in the followingorder each time the DSP SIMULATION button ispressed:(Remote control unit) (Remote control unit)(Remote control unit) (Remote control unit)WIDE SCREENJAZZ CLUBSUPER STADIUM ROCK ARENAMATRIXVIDEO GAME CLASSIC CONCERTMONO MOVIE2 Press the SURROUND PARAMETERbutton.• Display the surround parameter menu.3 Press the CURSOR DD or HH button toselect the various surround parameters.5 Press the ENTER or SURROUNDPARAMETER button to complete thesetting.4 Press the CURSOR FF or GG button toadjust the parameters setting.ONOFF7CH STEREO5CH STEREOThe screen for the selected surround modeappears.• When “Default” is selected and the CURSOR FFbutton is pressed, “CINEMA EQ.” and “D.COMP.”are automatically turned off, “ROOM SIZE” is set to“medium”, “EFFECT LEVEL” to “10”, “DELAYTIME” to “30 ms” and “LFE” to “0 dB”.• The “ROOM SIZE” expresses the expansion effectfor the different surround modes in terms of the sizeof the sound field, not the actual size of the listeningroom.DELAY TIME:In the matrix mode only, the delay time can be setwithin the range of 0 to 300 ms.SW ATT:This is the parameter for reducing the level of thesubwoofer channel when playing in the EXT. IN inputmode. Depending on the player you are using, thesubwoofer channel’s playback level may seem toohigh. If so, set “SW ATT” to “ON”.For DENON players, use with the default settings(“OFF”).Subwoofer ON/OFF:The subwoofer output can be controlled directly.ROOM SIZE:This sets the size of the sound field.There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and“large”. “small” recreates a small sound field,“large” a large sound field.EFFECT LEVEL:This sets the strength of the surround effect.The level can be set in 15 steps from 1 to 15. Lowerthe level if the sound seems distorted.2 Surround parameters yEFFECT:This parameter turns the effect signals with multisurround mode speaker effects on and off in theWIDE SCREEN mode. When this parameter isturned off, the SBL and SBR channel signals areequivalent to the SL and SR channels, respectively.LEVEL:This parameter sets the strength of the effectsignals in the WIDE SCREEN mode. It can be set in15 steps, from “1” to “15”. Set this to a low level ifthe positioning or phase of the surround signalssounds unnatural.SB CH OUT:• ON:Playback is conducted using the surround backspeaker.• OFF:Playback is conducted without using the surroundback speaker.NOTE:This operation can be performed directly pressingthe SURROUND BACK button on the main unit’s panel.Example: DSP surround simulation modeExample: 7CH STEREO mode• The “7CH STEREO” display changes as shownbelow according to the surround back speakersetting.