Denon AVC-A11XV Operating Instructions Manual

Also see for AVC-A11XV: Operating instructions Control protocol Service manual

Contents

Denon AVC-A11XV Operating Instructions Manual Manual pdf 49 page image

46ENGLISHAdvanced Setup – Part 1 Advanced Setup – Part 1ENGLISH2 Press the CURSOR DD or HH button toselect the setting, then press theCURSOR FF or GG button to select theparameter.Analog to HDMI Convert:• ON:Setting for converting analog video signals intoHDMI signals.• OFF:Setting for not converting analog video signals intoHDMI signals.Color Space:• Y Cb Cr:The Y Cb Cr format video signals is output via theHDMI output connector.• RGB:The RGB format video signals is output via theHDMI output connector.RGB Mode Setup:• Normal:Signals are output via the HDMI output connectorwith a digital RGB video range (data range) of 16(black) to 235 (white).• Enhanced:Signals are output via the HDMI output connectorwith a digital RGB video range (data range) of 0(black) to 255 (white).Setting the HDMI Out Setup• Set whether to use the analog video signals to HDMIconversion function.• When using this conversion function, set the colorformat and video range of the signals output fromthe HDMI terminal.1 Press the CURSOR DD or HH button toselect the “HDMI Out Setup” at the“Video Setup” menu, then press theENTER button.• Display the “HDMI Out Setup” screen.When the HDMI and the DVI-D connectors areconnected, the black may seem to stand out,depending on the TV or the monitor. In this case,set this to “Enhanced”.When “Y Cb Cr” is selected under “ColorSpace”, “RGB Mode Setup” will have no effect.3 Press the ENTER button to enter thesetting.• The “Video Setup” menu reappears.• “Color Space” and “RGB Mode Setup” are onlydisplayed when “Analog to HDMI Convert” is set to“ON”.• When connecting to an HDCP compatible monitorequipped with DVI-D terminal using an HDMI/DVI-Dconverter cable, the signals are output in RGBformat, regardless of the “Color Space” setting.• To view the on screen display using an HDMImonitor, set “Analog to HDMI Convert” at “HDMIOut Setup” to “ON” (default).2 Press the CURSOR FF or GG button to setthe delay time (0 ms ~ 200 ms).3 Press the ENTER button to enter thesetting.• The “Video Setup” menu reappears.With a movie source, for example, adjust so thatthe movement of the actors’ lips is synchronizedwith the sound.• The audio delay setting does not apply when playingin the EXT. IN mode or in the analog input directmode or stereo mode (only when the crossoverfrequency is set to “FIXED–THX–” (TONE DEFEAT“ON”, Room EQ “OFF”).• By default, this menu is not displayed when nodigital signals are being input.Setting the Audio Delay• When watching a DVD or other video source, thepicture on the monitor may seem delayed withrespect to the sound. In this case, adjust the audiodelay to delay the sound and synchronize it with thepicture.• The audio delay setting is stored separately for eachinput source.1 Press the CURSOR DD or HH button toselect the “Audio Delay” at the “VideoSetup” menu, then press the ENTERbutton.• Display the “Audio Delay” screen.Display Mode:• Mode 1:Prevents flickering of the on screen display whenthere is no video signal.• Mode 2:Flickering is not prevented.Use this mode if the on screen display does notappear in the Mode 1, as may happen according tothe TV being used.2 Press the CURSOR DD or HH button toselect the item to be set, then press theCURSOR FF or GG button to select theparameter.3 Press the ENTER button to enter thesetting.• The “Video Setup” menu reappears.Function/Mode Status:Set whether or not to turn on the on screen displayof the input source name and input mode when aninput source is selected.Master Volume Status:Set whether or not to turn on the on screen displayof the main volume level when the main volume isoperated.4 Press the CURSOR DD or HH button toselect the “Exit”, then press the ENTERbutton.• The “System Setup Menu” reappears.Setting the On Screen Display (OSD)• Use this to turn the on screen display (messagesother than the menu screens) on or off.• Sets the on screen display’s display mode.1 Use the CURSOR DD or HH button toselect the “On Screen Display” at the“Video Setup” menu, then press theENTER button.• Display the “On Screen Display” screen.