Denon AVC-A11XV Operating Instructions Manual

Also see for AVC-A11XV: Operating instructions Control protocol Service manual

Contents

Denon AVC-A11XV Operating Instructions Manual Manual pdf 63 page image

PageDefault settingsAdvanced PlaybackPageDefault settingsVideo SetupPageDefault settingsAudio Input Setup60ENGLISHAdvanced Setup – Part 2 Advanced Setup – Part 2ENGLISH42Digital InAssignThis assigns the digital input terminals for the different inputsources.InputsourceDigitalInputsCD DVD VDP TV DBS VCR-1 VCR-2COAX 1 COAX 2 COAX 3 OPT 1 OFF OPT 2 OPT 31CDR /TAPEOPT 4VCR-3OFFV.AUXOPT 52 EXT.IN Setup Set the EXT. IN terminal playback method. Surr.Sp = Surr.A, SW Level = +15dB43InputFunction Lev. The playback level is corrected individually for the different input sources. TUNER PHONO CD CDR /TAPE DVD VDP TV0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB3 VCR-20 dBDBS VCR-10 dB 0 dBVCR-30 dBV.AUX0 dB4 FunctionRenameThe names of the different input source can be changed as desired anddisplayed on the display. 435 IEEE1394AssignThe connected IEEE1394 device can be automatically identified to assignthe input source. – 43, 446 IEEE1394Auto Func.Set the function for associating playback of the connected IEEE1394device on or off. Auto Function = OFF 4442TUNER PHONO CD CDR /TAPE DVD VDP TV VCR-2DBS VCR-1 VCR-3 V.AUX4. Video Setup2 ComponentIn AssignHDMI/DVI InAssignThis assigns the component video input terminals for the different inputsources.The HDMI or DVI input terminals are assigned for the different inputsources.Select the HDMI audio signal playback method.DVD VDP TV1453 Video ConvertMode Set the input signal to be output from the monitor output terminal. AUTO 4544, 45DBS VCR-1 VCR-2 VCR-3 V.AUX1-RCA 2-RCA 3-RCA NONE NONE NONE NONE NONEAudio Delay Set the audio delay timing to synchronize the sound and video.5 0 ms 46On ScreenDisplayThis sets whether or not to display the on-screen display that appears onthe monitor screen when the controls on the remote control unit or mainunit are operated.6 Function/Mode = ON, Master Volume = ON, Mode = Mode 1 46DVD VDP TV DBS VCR-1 VCR-2 VCR-3 V.AUXNONE NONE NONE NONE NONE NONE NONE NONE4 HDMI OutAssignThis sets whether or not to use the function for converting analog video(composite video, S-Video or component video) signals into HDMIsignals.When using this conversion function, set the color format and videorange of the signals output from the HDMI terminal.Convert = ON, Color Space = Y Cb Cr, RGB Mode = Normal 463. Audio Input Setup5. Advanced Playback122chDirect/StereoAutoSurroundModeTurn the audio compression on or off when down-mixing Dolby Digitalsignals.3Dolby DigitalSetupThe speaker settings can be changed specifically for playing in the 2-channel direct or stereo mode.Set the Auto surround mode function.BasicOFFAuto Surround Mode = ON474747, 484 This parameter is for optimizing the Room EQ with which the audiosignals are produced from the speakers.Manual EQSetup All Channels and Frequency = 0 dB 48TUNEROFF