Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 16 page image

Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications• Connect the cables to be used (vpage 9 “Video ConversionFunction”).• With HDMI connections, the video and audio signals can betransferred with a single cable.• To output the audio signals to the monitor with HDMI connections,set GUI menu “Manual Setup” – “HDMI Setup” – “Audio” to “TV”(vpage 32).Connecting the Monitor47*%&0*/7*%&0$0.10/&/57*%&0: 1# 137*%&0*/)%.**/ */MonitorConnecting the Playback ComponentsNOTE• The component video connectors may be indicated differently onyour monitor. For details, see the monitor’s operating instructions.• The audio signals output from the HDMI connectors are only theHDMI input signals.47*%&0065"6%*07*%&0$0.10/&/57*%&0: 1# 137*%&0065 065"6%*0$0"9*"-0653-065065)%.*RLRLCarefully check the left (L) and right (R) channels and the inputs andoutputs, and be sure to interconnect correctly.DVD Player• Connect the cables to be used.• With HDMI connections, the video and audio signals can be transferredwith a single cable.DVD player• Connect an HDP (High-Definition Player) in the same way.• When using an optical cable or a BNC cable for the digital audioconnection, make the settings at GUI menu “Source Select” – “DVD”– “Assign” – “Digital” (vpage 48).• When using a BNC cable for the component video connection, makethe settings at GUI menu “Source Select” – “DVD” – “Assign” –“Component” (vpage 48).• When the AVP-A1HDCI and DVD player are connected using anHDMI cable, also connect the AVP-A1HDCI and monitor using anHDMI cable.• If the connected monitor or DVD player only has a DVI-Dconnector, use an HDMI/DVI converter cable. When using a DVIcable, no audio signals are transmitted.• Use a Deep Color compatible cable for connection to Deep Colorcompatible devices.NOTE• Use a CPPM-compatible DVD player to play DVD-Audio discs thatare copyright-protected by CPPM.• The audio signals output from the HDMI connector (samplingfrequency, bit rate, etc.) may be restricted by the connecteddevice.• Video signals are not output properly when using devices that arenot HDCP-compatible.• Video signals are not output if the input video signals do not matchthe monitor’s resolution. In this case, switch the DVD player’sresolution to a resolution with which the monitor is compatible.• If the GUI menu “Manual Setup” – “HDMI Setup” – “Audio”setting (vpage 32) is set to “Amp”, the sound may beinterrupted when the monitor’s power is turned off.• Use a cable on which the HDMI logo is indicated (a certified HDMIproduct) for connection to the HDMI connector. Normal playbackmay not be possible when using a cable other than one on whichthe HDMI logo is indicated (a non-HDMI-certified product).• If the monitor or DVD player does not support Deep Color, DeepColor signal transfer is not possible.• If the monitor or DVD player does not support xvYCC, xvYCCsignal transfer is not possible.• If the monitor does not support “Auto Lipsync Correction”function, this function will not work.• The AVP-A1HDCI is compatible with the HDMI’s CEC (ConsumerElectronics Control) function. Please note the following.• It may not work depending on the device it is connected to andits setup.• It does not operate with televisions or players that are notcompatible with HDMI’s CEC.Connections