Getting StartedConnectionsSetupRemote ControlMulti-ZoneInformationTroubleshootingSpecifications[Example 4]PDA menu screenNOTEYou cannot change setup menu operations and zone name on thePDA menu screen.[Example 5]Net Audio operating screenSelect tooperate eachzone.Click the menu from which you want tomake settings.Click to move up/down the menupages.Click to repeat play.When registering presets, click “v” toselect the channel you want to register,and then click “MEMORY”.Click to stop play.Click to random play.Click when selecting menu.Click “v” to select the preset channel you wantto play.When searching using an acronym, click “v” and selectfrom the displayed characters.NOTE•To perform web control, you must connect a web control devicesuch as a PC to the same network as the AVP-A1HDCI.•With web control, some network settings, etc., cannot be set.•When updating firmware, settings made by the web controller maybe reset.SOURCE SELECTINPUT MODEINPUT MODE[AMP]SOURCESELECTAbout the button names in these explanations<>: Buttons on the main unit[]: Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitSurround modeOther Operations andFunctionsOther OperationsPlaying Super Audio CD1Assign “DENON LINK” with the “Digital” setting orassign “HDMI” with the “HDMI” setting (vpage48).2Either turnor press[SOURCESELECT]to select the input source assigned in step 1.The “” or “” indicator lights on the display.3Select “AUTO” for theINPUT MODE(vpage 47).4Select the surround mode (vpage 50 ~ 52).We recommend playing in the DIRECT mode.5Start playing the Super Audio CD.The “” indicator lights on the display.For operating instructions, refer to the respective equipment’soperating instructions.•When playing DSD signals in the DIRECT or PURE DIRECT mode,the DSD signals are converted as such into analog signals. Whenplaying in other surround modes, the DSD signals are first convertedinto PCM format, then into analog signals.•“DSD DIRECT” is shown on the display when playing DSD 2-channelsignals in the DIRECT mode. “DSD MULTI DIRECT” is shown onthe display when playing DSD multi--channel signals in the DIRECTmode.•The DSD signal may not be output depending on the equipmentthat is connected.For further details, refer to the user manual for theequipment being used.Surround modePlayback