Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 90 page image

Getting Started Connections Setup Playback Remote Control Information Troubleshooting SpecificationsMulti-Zone OperationsTurning the Power On and OffGOperation on the main unitHPress , or forthe zone to be operated.When the power turns on, the multi-zone indicator lights on the display.GOperation on the remote control unitHIn the zone mode you want to operate, press [ON] or [OFF].Selecting the Input SourceGOperation on the main unitHq Press and select the zone to be adjusted.w Turn .GOperation on the remote control unitHIn the zone mode you want to operate, press [SOURCE SELECT].Adjusting the VolumeGOperation on the main unitHq Press and select the zone to be adjusted.w Turn to adjust.GOperation on the remote control unitHIn the zone mode whose volume you want to adjust, press [VOLUME].[Variable range] – – – –70dB ~ –40dB ~ 18dB• The volume can be adjusted when GUI menu “Manual Setup”– “Zone Setup” – “(select the zone)” – “Volume Level” is set to“Variable”. The volume can be increased up to the value set atGUI menu “Manual Setup” – “Zone Setup” – “(select the zone)”– “Volume Limit” (vpage 39).• The volume for ZONE2 and ZONE3 can be adjusted with the remotecontrol unit.SOURCE SELECT VOLUME[ON][OFF][MUTE]VOLUME[ AMP]SOURCESELECT(ZONE2 mode)About the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitZONE2 MENUINPUT :DVDSIGNAL:ANALOGVOL. :-40dB>Bass 0dBHPF OFFTreble 0dBLch Lev. 0dBRch Lev. 0dBZONE2 MENU>Channel STEREOVol.Lev. VARP.On Lev. LASTVol.Limit OFFMute Lev. FULLTurning off the Sound TemporarilyIn the zone mode for which you want to mute the sound, press[MUTE].The sound is reduced to the level set at GUI menu “Manual Setup”– “Zone Setup” – “(select the zone)” – “Mute Level” (vpage 39).To cancel, either adjust the volume or press [MUTE] again.The setting is canceled when the zone’s power is turned off.• The source selected for ZONE3 is also output from the recordingoutput connectors.• When the [MENU] is selected, it is possible to carryout “ZoneSetup” looking at the on-screen display in ZONE2. Also, when the“OSD” is set as “ZONE2/ZONE3”, the on-screen display comes onthe ZONE2 monitor when ZONE3 has been operated so it is possibleto operate it looking at this.NOTE• The digital signal from the digital input connectors (OPTICAL/COAXIAL) are output to the analog audio connectors in ZONE2 andZONE3 in the case of PCM (2-channel) signals only.• Digital audio signals input from the DENON LINK or HDMI connectorscannot be played in multi-zone.• “XM” or “HD Radio” cannot be selected with digital output(OPTICAL) in ZONE2. Copyright-protected Network audio signals(Internet radio, media server, USB, Rhapsody) cannot be output.• In ZONE4, it is not possible to select “XM”, “HD Radio”, or sourceswith no digital input signals (“TUNER”, “PHONO”, “iPod”, etc.).Network audio signals (Internet radio, media server, USB, Rhapsody)can be played as long as they are not copyright-protected.• When certain digital signals are being input, noise may be outputfrom the ZONE2 and ZONE3 audio output connectors.(ZONE3 orZONE4 mode)[OFF][ON][MENU][ZONE SELECT][OFF][MUTE]Multi-zoneindicator[ON]VOLUME[MENU]SOURCE SELECT(Main remote control unit)(Sub remote control unit)Multi-Zone