|
Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting SpecificationsCH SELECT QUICK SELECTuio puio pCH SELECTQUICK SELECTAbout the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unit1 Set the input source, input mode, surround mode,room EQ settings and volume to the conditions youwant to store.2 Press and hold the desired QUICK SELECT.Keep pressing the button until the quick select indicator lights.• To call out the settings, press QUICK SELECT at which the desiredsettings were stored.• The Quick Select name can be changed (vpage 42).NOTEInput sources stored with the quick select function cannot be selectedif they have been deleted at GUI menu “Manual Setup” – “OptionSetup” – “Source Delete” (vpage 41). In this case, store themagain.Input Source VolumeQuick Select 1 DVD –40 dBQuick Select 2 TV/CBL –40 dBQuick Select 3 VCR –40 dB[Quick Select Defaults]1 Press CH SELECT.2 Press ui or CH SELECT to select “Fader”.3 Use o p to adjust the volume of the speakers.(o: front, p: rear)• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker adjustedto the lowest value is –12 dB.1 Press CH SELECT.2 Use ui or CH SELECT to select the speaker.The speaker that can be set switches each time one of thebuttons is pressed.3 Use o p to adjust the volume.b ”OFF” can be set by pressing o when the subwoofer’s volumeis set to –12dB.The surround parameters, tone control, room EQ settings and thevolumes of the different speakers are stored for the individual surroundmodes.Quick Select FunctionWith this function, the currently playing input source, input mode,surround mode, room EQ settings and volume can be stored inthe memory.Fader FunctionThis function lets you adjust (fade) the sound from all the front orrear speakers at once.Channel LevelYou can adjust the channel level either according to the playbacksources or to suit your taste, as described below.Personal Memory Plus FunctionThis function sets the settings (input mode, surround mode,HDMI output mode, Picture Adjust, Audio Delay etc.) last selectedfor the individual input sources.When you switch to an input source, the settings are automaticallyset to the ones that were set the last time that input source wasused.Playback
|
