Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 50 page image

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsThis can be set when “i/p Scaler” is set to anything other than “OFF”.AspectThis sets the aspect ratio when outputting 480i/576i or 480p/576pinput signals from the HDMI output connector.[Input source]DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUXNET/USB[Selectable items] Full NormalThis can be set when “i/p Scaler” is set to anything other than “OFF”.Progressive ModeSelect optimum progressive mode for video material.[Input source]DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX[Selectable items] Auto Video1 Video2• This can be set when “i/p Scaler” is set to anything other than“OFF”.• When the “i/p Scaler” is set to “A to H & H to H”, the resolutions canbe setup to the analog video input signal and HDMI input signal.• To enjoy 1080p/24 Hz video images, use a monitor which supports1080p/24 Hz video signals.• With film source (24 Hz), you can enjoy a film-like image. It isrecommended that you use 1080p/60 Hz for video source and mixedsource.• It is not possible to convert a 50 Hz signal to 1080p/24 Hz. It is outputat a resolution of 1080p/50 Hz.• It is not possible to convert a 1080p/60 Hz signal to 1080p/24 Hz.Operating from the main unitPress the SCALE button.Auto 480p / 576p 1080i1080p1080p:24 Hz 720pResolutionSet resolution for video signal output to HDMI.[Selectable items]Auto 480p/576p 1080i 720p 1080p 1080p:24 Hzh Input ModeMake input mode and decode mode settings for this source.The selectable input modes depend on the input source and“Assign” setting (vpage 48, 49).Input ModeSet the input mode for this source.[Input source] TUNER PHONO ( iPod )[Selectable items] Analog EXT. IN[Input source] NET/USB XM HD Radio[Selectable items] Auto EXT. IN[Input source]CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2V.AUX[Selectable items]Auto HDMI Digital Analog EXT. INWhen a digital signal is properly input, the “ ” indicator lights onthe display. If the “ ” indicator does not light, check the digital inputconnector assignment and the connections.Operating from the main unit or main remotecontrol unitPress the INPUT MODE button on the main unit or the INPUT buttonon the main remote control unit.z1: This can be selected for input sources for which the GUI menu“Assign” setting is set to “HDMI” (vpage 48). Excluding CDand TUNER.z2: This can be selected for input sources for which the GUI menu“Assign” setting is set to “Digital” (vpage 48).AutoEXT. INHDMI z1 Digital z2AnalogDecode ModeSet the decode mode for this source.[Input source]CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX[Selectable items] Auto PCM DTS• This can be selected for input sources for which the GUI menu“Assign” setting is set to “HDMI” or “Digital”.• Only set “PCM” and “DTS” when playing the respective signals.j RenameChange the display name for this source.Names containing up to 8 characters can be input.[Characters that can be input]A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)For input sources for which “HDMI” or “Digital” are set at the GUImenu “Assign” setting, the analog input level and digital input levelcan be set separately.k Source LevelCorrects the playback level of the selected input source’s audioinput.[Variable range] –12dB ~ 0dB ~ +12dBSetup