Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 84 page image

Getting Started Connections Setup Playback Multi-Zone Information Troubleshooting SpecificationsSystem Call FunctionThis function lets you register a series of operations at a singlebutton.For example, the amplifier can be turned on, the input sourceselected, the monitor’s power turned on, the source device’spower turned on and the play mode set all by pressing a singlebutton.Up to 32 signals each can be registered at [SYSTEM CALL] (1, 2or 3).1 Press [MODE SELECTOR] for the device you want toregister.2 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice.3 Press [9], [7] and [8], in that order.The signal transmission indicator flashes twice and the systemcall registration mode is set.4 Press [SYSTEM CALL] (1, 2 or 3) at which you want toregister the signals.5 Press the buttons you want to register in the samesequence as the operations you want to perform.The signal transmission indicator lights when a button ispressed.Example : Press [POWER ON].↓Press [MODE SELECTOR] – [DVD].↓Press [1].b The mode can be switched by pressing [MODE SELECTOR].b Perform the registration procedure for all the buttons you want toregister.6 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice and the settingis completed.Calling out1 Press [AMP], to select “SYSTEM CALL”.2 Press [SYSTEM CALL] (1, 2 or 3) at which the signalswere registered.The registered signals are transmitted in the registeredsequence.RegisteringPunch Through FunctionCD, DVD or VCR mode buttons can be stored at unused TV orSAT/CBL mode buttons.For example, when DVD mode buttons are assigned to the TVmode, the DVD mode operations can be performed while in theTV mode.1 Press [MODE SELECTOR] for the device you want topunch through (CD, DVD or VCR).2 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice.3 Press [9], [8] and [4], in that order.The signal transmission indicator flashes twice and the punchthrough setting mode is set.4 Press [MODE SELECTOR] for the device you want topunch through (CD, DVD or VCR).5 Press the button you want to punch through (1, 2,6, 7, 8, 9 or 3).6 Press [MODE SELECTOR] for the equipment (TV orSAT/CBL) you want to set to punch-through.7 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice and the settingis completed.Signaltransmissionindicator[NUMBER][MODESELECTOR][RC SETUP][CHANNEL+/–][SYSTEM CALL][ AMP][POWER ON][8], [9],[1],[6], [7],[3], [2]Remote Control