Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 88 page image

Getting Started Connections Setup Playback Multi-Zone Information Troubleshooting Specifications[USB][ALL MUSIC/FAVORITES][ZONE SELECT][ZONE OFF][MENU][RANDOM][REPEAT][ADVANCED SETUP]1 Press [ZONE SELECT].The currently selected multi-zone indicator lights.2 While the multi-zone indicator is light, press [ZONESELECT] to select the zone to be operated.The currently selected multi-zone indicator lights.1 Use the tip of a pen to press [ADVANCED SETUP].All the multi-zone indicators light.2 Select the multi-zone to be set.The selected multi-zone indicator lights.q To set to “MAIN ZONE” : Press [REPEAT].w To set to “ZONE2” : Press [RANDOM].e To set to “ZONE3” : Press [USB].r To set to “ZONE4” : Press [ALL MUSIC/FAVORITES].3 Use the tip of a pen to press [ADVANCED SETUP].The multi-zone indicator turns off.To Cancel1 Use the tip of a pen to press [ADVANCED SETUP].The currently selected multi-zone indicator lights.2 Press [ZONE SELECT].All the multi-zone indicators light.3 Use the tip of a pen to press [ADVANCED SETUP].The multi-zone indicator turns off.1 While pressing [MENU], press [ADVANCED SETUP]with the tip of a pen.The multi-zone indicator corresponding to the currently selectedremote ID flashes.2 Select the remote ID to be set.q To set to 1 : Press [REPEAT].The “M” indicator flashes.w To set to 2 : Press [RANDOM].The “Z2” indicator flashes.e To set to 3 : Press [USB].The “Z3” indicator flashes.r To set to 4 : Press [ALL MUSIC/FAVORITES].The “Z4” indicator flashes.3 While pressing [MENU], press [ADVANCED SETUP]with the tip of a pen.The multi-zone indicator turns off.While pressing [ZONE OFF], press [ADVANCED SETUP]with the tip of a pen.All the multi-zone indicators flash 4 times, then all the settings arerestored to their defaults.NOTEWhen changing a setting, be sure to set the same remote ID as theAVP-A1HDCI’s (vpage 43).Multi-zone indicatorSwitching ZonesUse this procedure to select the zone to be operated by the subremote control unit.Setting the Zone for Which the SubRemote Control Unit is Used (ZONESELECT LOCK Mode)We recommend always using the sub remote control unit for thesame room. When this is done, the unit can be set so that thezone does not switch when buttons are operated.Setting the Remote IDWhen using multiple DENON AV receivers in the same room,make this setting so that no AV receiver other than the desiredone operates.Resetting the SettingsRemote Control