Denon AVP-A1HD Owner's Manual

Also see for AVP-A1HD: Product Compatibility Chart Owner's manual Owner's manual Owner's manual Brochure & specs

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 76 page image

Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting SpecificationsREC SELECT> About the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitRecording on an External Device(REC OUT mode)You can listen to one program source while recording a differentprogram source.1 Press .“ZONE3 SOURCE” is shown on the display.2 Turn until “RECOUT SOURCE”is displayed.The “ ” indicator lights.ZONE3 SOURCE ZONE3 TUNER ZONE3 HD Radio····RECOUT HD Radio RECOUT XM RECOUT SOURCE····3 Turn to choose the input sourceto be recorded.4 Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage59).5 Start recording.For operating instructions, refer to the respective equipment’soperating instructions.• To cancel, press , then turn SELECT> until “ZONE3 SOURCE” is displayed.• Make a test recording before starting the actual recording.• Signals are only output to the analog REC OUT connectors whenthe digital signals input to the digital input connectors (OPTICAL/COAXIAL) are PCM (2-channel) signals.• Digital audio signals input to the DENON LINK or HDMI connectorsare not output to the REC OUT connectors, so connect using theOPTICAL or COAXIAL connectors.• Sources selected with the REC OUT mode are output from ZONE3as well.• In the REC OUT mode, the remote control unit’s ZONE3 modebuttons cannot be operated.• When the “Digital Out” setting is set to “ZONE4 Select”, theOPTICAL4 output connector becomes the ZONE4 output. Whenusing for recording, set to “Rec Select”.• Copyright protected network audio (Internet radio, media server,USB and Rhapsody) signals cannot be output from the digital outputconnectors (OPTICAL).NOTE• Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.• When “DENON LINK” is assigned at the GUI menu “Assign” setting,the PCM signals, network audio signals (Internet radio, media server,USB and Rhapsody), XM signals and HD Radio signals input from thedigital input connectors cannot be output from the analog REC OUTconnectors.• Input sources for which “Delete” is selected at “Source Delete”cannot be selected.Dolby Headphone recordingWhen REC OUT mode is set to “SOURCE”, with the AVP-A1HDCI itis possible to output signals encoded in the Dolby Headphone modefrom the recording output terminal and record them on a separaterecorder.1 The Dolby Headphone play mode is set whenheadphones are connected to duringplayback in the STANDARD (DOLBY/DTSSurround) mode.When this is done, signals encoded in the Dolby Headphonemode are automatically output from the recording outputterminals (analog and digital) and can be recorded.2 Select the parameters and set the desired mode.Start recording.Refer to the “Dolby Headphone” (vpage 51).NOTEDo not disconnect the headphones during recording.Playback