Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsAuto SetupOptimize settings for speakers in use.Some typical examples are described below.AUTO SETUP1 2 3 4 5StartRETURNPre-out AssignXLR Out PolarityConfig. 9.1SW 1SPSTEP1 Speaker DetectionPlease place the microphone at earheight at main listening position.Start Auto SetupEnter CancelSelected itemnameList of subsequent itemsGuidance text for itemat cursor positionOperation step indicatorsIllustrationOperationbutton guidanceGuidance text for item at cursorpositionOperation guidance textn Iconn ListAssignInput ModeVideoRenameSwitch the selected itemSelected itemSwitch the selected itemSwitch to the next itemSelected itemExample of the Display of the GUIMark at a TitleExample: Browse Menu (Top Menu)Examples of GUI Screen DisplaysExample: Menus with Illustrations(Auto Setup)Cursor Position DisplayOperationsThe same operation is possible on the main unit or remote control unit.GUI Menu OperationsWith the AVP-A1HDCI, settings and operations for most functions canbe performed by operating while looking at the GUI menus displayedon the monitor screen.b Switch the selected item usingui.1 Press the MENU button.The GUI menu is displayed.b To operate from the main remote control unit, be sure to set theremote control unit to the AMP mode.2 Press the u i p button to select the menu to be setor operated.b To return to the previous item, press the o or RETURN button.3 Press the ENTER button to enter the setting.4 Press the MENU button to finish.Example of Display of DefaultValues[Selectable items] 9.1 7.1 5.1In lists of selectable items or adjustable ranges, the itemsurrounded by a border is the default value.Items for which this mark is indicated at the title can be operatedfrom the GUI.We recommend performing such operations from the GUI.This is the GUI icon for this setting item or for the menu series towhich this item belongs.Switch to the next itemThe GUI cannot be superimposed when xvYCC signals and component1080p signal, computer’s resolution (e.g.VGA) are input.Setup