14Connecting Other SourcesCable indicationsSignal directionAudio and Video cableThe hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).Video cableAudio cableNOTE:• Do not plug in the power supply cord until all connectionshave been completed.• When making connections, also refer to the operatinginstructions of the other components.• Be sure to connect the left and right channels properly (leftwith left, right with right).• Note that binding pin-plug cables together with powersupply cords or placing them near a power transformer willresult in hum or other noise.NOTE:• Connecting a LD (laser disc) player with a Dolby DigitalRF Output.The AVR-3806 does not have a DD RF demodulator function.Therefore, you need to use a commercially availableoutboard DD RF demodulator and connect its digital outputto one of the AVR-3806 available digital inputs. Refer to thedemodulator’s owner’s manual for further information.Analog terminal (Stereo)ARLRL(Orange)Pin-plug cableAnalog terminal (Monaural, for subwoofer)BPin-plug cableDigital terminal (Coaxial)CCoaxial cable (75 Ω/ohm pin-plug cable)(Yellow)Digital terminal (Optical)DOptical cable (Optical fiber cable)DENON LINK terminalEDENON LINK cableSpeaker terminalFSpeaker cableVideo terminalGHDMI terminalJHDMI cableVideo cable (75 Ω/ohms video pin-plug cable)S-Video terminalHS-Video cableAudio signalVideo signal(White)(Red)Component video terminalIComponent video cable(Y)(P B/CB)(PR/CR)(Green)(Blue)(Red)IN OUT OUT ININ OUT OUT INConnecting Other Sources