Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

64Advanced Setup – Part 1 Advanced Setup – Part 1SW Level:Sets the playback level of the analog signal that was input tothe EXT. IN subwoofer terminal.Select according to the specifications of the player beingused. Also refer to the player’s operating instructions.+15dB (default) recommended. (0, +5, +10 and +15 can beselected.)3 Press the ENTER button to enter the setting.• The “Audio Input Setup” menu reappears.Setting the Input Function Level• Correct the playback level of the different input sources.• Adjust the playback levels of the devices connected to thedifferent input sources to the same level to eliminate the needfor adjusting the main volume each time the input source isswitched.1 Press the CURSOR DD or HH button to select the“Input Function Lev.” at the “Audio InputSetup” menu, then press the ENTER button.• The “Input Function Lev.” screen appears.3 Press the ENTER button to enter the setting.• The “Audio Input Setup” menu reappears.2 Press the CURSOR DD or HH button to select theinput source, then press the CURSOR FF or GGbutton to adjust the level.The level can be adjusted between –12 dB and +12 dB inunits of 1 dB.If “Yes” is selected for “Default”, the settings areautomatically reset to the default values.Setting the Function RenameThe names of the input sources displayed on the front displayand on the on screen display can be changed. The names orbrands of the devices connected to the input sources can beinput.1 Press the CURSOR DD or HH button to select the“Function Rename” at the “Audio Input Setup”menu, then press the ENTER button.• The “Function Rename” screen appears.2 Press the CURSOR DD or HH button to select theinput source whose name you want to change,then press the CURSOR FF or GG button.• The screen switches to the character input screen.Example: When “DVD” is selected and the CURSOR FF orGG button is pressed3• After completing this setting, check that the playback levels forthe different sources are the same.• When the input source is selected, the display is as shownbelow.Example: When the name has been changed to “DVD-5910”Press the CURSOR FF or GG button to move thecursor ( 22 ) to the character, number, symbol orpunctuation mark you wish to input, and pressthe CURSOR DD or HH button to select thatcharacter.A B C D E F G H I J K L M N O P Q R S T U V W X Y Za b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 45 6 7 8 9! ” # % & ’ ( ) * + , – . / : ; < = > ? @ [ \ ] (space)Up to 8 characters can be input.4 Repeat step 3 to input the input source name.If you wish to set the input source back to as it wasinitially, press the CURSOR HH button with the input sourcehighlighted.If “Yes” is selected for “Default”, the setting areautomatically reset to the default name.5 Once all the characters have been input, pressthe ENTER button.• The “Function Rename” screen reappears.Use the same procedure to change other input sourcenames as well.6 Press the ENTER button to enter the setting.• The “Audio Input Setup” menu reappears.