Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

68Advanced Setup – Part 1 Advanced Setup – Part 12 Press the CURSOR DD or HH button to select thesetting, then press the CURSOR FF or GG button toselect the parameter.Setting the Audio Delay• When watching a DVD or other video source, the picture on themonitor may seem delayed with respect to the sound. In thiscase, adjust the audio delay to delay the sound and synchronizeit with the picture.• The audio delay setting is stored separately for each inputsource.1 Press the CURSOR DD or HH button to select the“Audio Delay” at the “Video Setup” menu, thenpress the ENTER button.• The “Audio Delay” screen appears.Analog to HDMI Convert:• ON:Setting for converting analog video signals into HDMIsignals.• OFF:Setting for not converting analog video signals into HDMIsignals.Color Space:• Y Cb Cr:The Y Cb Cr format video signals is output via the HDMIoutput connector.• RGB:The RGB format video signals is output via the HDMIoutput connector.RGB Mode Setup:• Normal:Signals are output via the HDMI output connector with adigital RGB video range (data range) of 16 (black) to 235(white).• Enhanced:Signals are output via the HDMI output connector with adigital RGB video range (data range) of 0 (black) to 255(white).Setting the On Screen Display (OSD)• Use this to turn the on screen display (messages other than themenu screens) on or off.• Sets the on screen display’s display mode.1 Press the CURSOR DD or HH button to select the“On Screen Display” at the “Video Setup” menu,then press the ENTER button.• The “On Screen Display” screen appears.2 Press the CURSOR DD or HH button to select theitem to be set, then press the CURSOR FF or GGbutton to select the parameter.Function/Mode Status:Set whether or not to turn on the on screen display of theinput source name and input mode when an input sourceis selected.signals.Master Volume Status:Set whether or not to turn on the on screen display of themain volume level when the main volume is operated.Display Mode:• Mode 1:Flickering is not prevented.• Mode 2:Prevents flickering of the on screen display when thereis no video signal.Use this mode if the on screen display does not appearin the Mode 1, as may happen according to the TV beingused.3 Press the ENTER button to enter the setting.• The “Video Setup” menu reappears.• “Color Space” and “RGB Mode Setup” are only displayedwhen “Analog to HDMI Convert” is set to “ON”.• When connecting to an HDCP compatible monitor equippedwith DVI-D terminal using an HDMI/DVI-D converter cable, thesignals are output in RGB format, regardless of the “ColorSpace” setting.• To view the on-screen display using an HDMI monitor, set“Analog to HDMI Convert” at “HDMI Out Setup” to “ON”(default).• The audio delay setting does not apply when playing in the EXT.IN mode or in the analog input direct mode or stereo mode(Front speaker setting “Large” TONE DEFEAT “ON” and RoomEQ “OFF”).• By default, this menu is not displayed when no digital signalsare being input.2 Press the CURSOR FF or GG button to set the delaytime (0 ms ~ 200 ms).With a movie source, for example, adjust so that themovement of the actors’ lips is synchronized with thesound.3 Press the ENTER button to enter the setting.• The “Video Setup” menu reappears.When the HDMI connectors are connected, the black mayseem to stand out, depending on the TV or the monitor. Inthis case, set this to “Enhanced”.When “Y Cb Cr” is selected under “Color Space”, “RGBMode Setup” will have no effect.