Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

43Basic Operation Basic Operation1 Set the input source to “TUNER”.(Main unit) (Remote control unitin the AMP mode)2 Press the TUNER button onthe remote control unit toselect the TUNER mode.3Auto tuningManual tuning• When in the auto tuning mode on the FM band, the “STEREO”indicator lights on the display when a stereo broadcast is tunedin. At open frequencies, the noise is muted and the “TUNED”and “STEREO” indicators turn off.• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.4 Press the MODE button to set the auto tuningmode.• “Auto” appears on the display.5 Press the TUNING button.• Automatic searching begins, then stops when a station istuned in.• If tuning does not stop at the desired station, use to the“Manual tuning” operation.Listening to the radioTUNING PRESETFUNCTION(Remote control unit)Check that the remote control unit is set to AMP or TUNER.1 Set the input source to “TUNER”.(Main unit)2 Press the TUNER button onthe remote control unit toselect the TUNER mode.3(Remote control unit)4 Press the MODE button to set the manual tuningmode.Check that the display’s “AUTO” indicator turns off.Watching the display, press the BAND button toselect the desired band (AM, FM or XM).When listening to the XM Satellite Radio ( page 45).Watching the display, press the BAND button toselect the desired band (AM, FM or XM).When listening to the XM Satellite Radio ( page 45).TUNERMEMORY BLOCKMEMORYON SCREENSHIFTCHANNELNUMBERTUNINGMODEBANDTUNER5 Press the TUNING button to tune in the desiredstation.The frequency changes continuously when the button isheld in.(Remote control unitin the AMP mode)