Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

67Advanced Setup – Part 1 Advanced Setup – Part 16 Press the ENTER button to enter the setting..• The “Video Setup” menu reappears.• If a monitor is connected with an HDMI cable but the monitoris not compatible with HDMI audio signal playback, only thevideo signals are output to the monitor from the AVR-3806 (DVImode).Press the STATUS button to check which mode is set foroutputting HDMI signals from the AVR-3806 (HDMI and DVImodes).• Input signals input from the analog and digital terminals are notoutput to the TV.• With HDMI, the video and audio signals are transferredsimultaneously. When HDMI is assigned to an input source, thedigital audio input assignment switches to HDMI along with thevideo input.When this setting is made for input sources to which a digitalaudio input (DENON LINK, OPTICAL etc.) is previouslyassigned, the digital audio assignment is set to HDMI.In this case, reassign the digital input using the proceduredescribed at “Digital In Assign” ( page 63) .• Down-converting from the component video signal to the S-Video and composite video signal is possible only when theresolution of a component video signal is 480i / 576i.• When a non-standard video signal from a game machine orsome other source is input, the video conversion functionmight not operate. If this happens, please set the conversionmode to OFF.• When the video conversion function has been used,information such as that of text broadcasts which has beenadded to the video signal might not be output. If this happens,please set the conversion mode to OFF.2 Press the CURSOR DD or HH button to select theinput source, then press the CURSOR FF or GGbutton to select the component video inputterminal.Select from among 1-RCA to 3-RCA.If the same component video input terminal is selected,the setting for the input source that was previouslyassigned switches to “NONE”.If “Yes” is selected for “Default”, the settings are reset tothe default values.Setting the Component In AssignThis setting assigns the component video input terminal of theAVR-3806 for the different input sources.1 Press the CURSOR DD or HH button to select the“Component In Assign” at the “Video Setup”menu, then press the ENTER button.• The “Component In Assign” screen appears.3 Press the ENTER button to enter the setting.• The “Video Setup” menu reappears.Setting the Video ConvertSet whether or not to use the video conversion function.1 Press the CURSOR DD or HH button to select the“Video Convert” at the “Video Setup” menu,then press the ENTER button.• The “Video Convert” screen appears.2 Press the CURSOR DD or HH button to select theinput source, then press the CURSOR FF or GGbutton to select the “ON” or “OFF”.ON:The convert function operates.When there are multiple input signals, the input signalsare detected and the input signal to be output from thevideo monitor output terminal is selected automatically inthe following order: component video, S-Video,composite video.OFF:The convert function does not operate.The video signal input from the video input terminal isonly output to the video monitor out terminal.The S-Video signal input from the S-Video input terminalis only output to the S-Video monitor out terminal.The component input signal input from the componentinput terminals is only output to the component monitoroutput terminals.3 Press the ENTER button to enter the setting.• The “Video Setup” menu reappears.Setting the HDMI Out Setup• Set whether to use the analog video signals to HDMIconversion function.• When using this conversion function, set the color format andvideo range of the signals output from the HDMI terminal.1 Press the CURSOR DD or HH button to select the“HDMI Out Setup” at the “Video Setup” menu,then press the ENTER button.• The “HDMI Out Setup” screen appears.