Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

55Advanced Operation Advanced OperationResetting1 Press and hole the SET UP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 8 button (9→→77→→88)) to select asetting.• The IR segment blinks twice.1 Press and hold the SETUP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 6 button (9 →→ 77 →→ 66)).• The IR segment blinks twice.3 Press the MODE SELECTOR button.4 Press the learned button you want to reset twice.• The IR segment blinks twice.Other key can be deleted by repeating steps 1 to 4.2 Resetting the single learned button1 Press and hole the SET UP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 8 button (9→→77→→88)) to select asetting.• The IR segment blinks twice.1 Press and hold the SETUP button for at leastthree seconds.• The IR segment blinks twice.4 Press and hold the SETUP button for at leastthree seconds to clear the system call.• The IR segment blinks twice.2 Press the 9, 7, 8 button (9 →→ 77 →→ 88)).• The IR segment blinks twice.3 Press the SYSTEM CALL button (1 to 3) you wantto reset.2 Resetting the system call buttons1 Press and hole the SET UP button for at leastthree seconds.• The IR segment blinks twice.2 Press and hold the SETUP button for at leastthree seconds.• The IR segment blinks twice.1 Press the MODE SELECTOR button (TV or SAT /CBL) you want to reset.4 Press and hold the SETUP button for at leastthree seconds to reset the punch through setting.• The IR segment blinks twice.2 Resetting the punch through setting1 Press and hole the SET UP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 8 button (9→→77→→88)) to select asetting.• The IR segment blinks twice.1 Press and hold the SETUP button for at leastthree seconds.• The IR segment blinks twice.2 All reset function1 Press and hole the SET UP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 8 button (9→→77→→88)) to select asetting.• The IR segment blinks twice.1 Press and hold the SETUP button for at leastthree seconds.• The IR segment blinks twice.2 Press the 9, 7, 6 button (9 →→ 77 →→ 66)).• The IR segment blinks twice.3 Press the MODE SELECTOR button you want toreset twice.• The IR segment blinks twice.2 Resetting all learned buttons2 Press the 9, 8, 1 button (9 →→ 88 →→ 11)).• The IR segment blinks four times.• Clear the entire system memory, which will restore theremote control unit to the factory default settings.Only use this if you wish to clear all customized settings andmemories and restore the unit to its out-of-the-box factorydefault settings.SYSTEM CALLNUMBERSETUPMODE SELECTORIR segment3 Press the 9, 8, 4 button (9→→88→→44)) to select asetting.• The IR segment blinks twice.