Denon AVR-3806S Operating Instructions Manual

Also see for AVR-3806: Capabilities and Compatibilities Guide Specifications Supplementary guide Code List Service manual

Contents

49Advanced Operation Advanced OperationPreset memoryThe included remote control unit (RC-1024) can be used tooperate devices of different brands by registering the presetnumber corresponding to the brand of your device.For some models the remote control unit or the device may notoperate properly. In this case, use the learning function (page 52) to store your device’s remote control signals in theincluded remote control unit.1 Press the MODE SELECTOR button for thecomponent you want to preset.Presetting is not possible for the AMP, ZONE2, ZONE3,TUNER and SYSTEM CALL modes.MODE SELECTORNUMBERSETUPIR segment2 Press and hold the SETUP button for at leastthree seconds.• The top IR segment blinks twice.Operating a component stored in the presetmemory2 Operate the component.For details, refer to the component’s operating instructions.Some models cannot be operated with this remote controlunit.1 Press the MODE SELECTOR button for thecomponent you want to operate.3 Referring to the included List of Preset Codes( End of this manual), press the NUMBER toinput the preset code (a 5-digit number) for themanufacturer of the component whose signalsyou want to store in the memory.•The top IR segment blinks once after each key press.•If the remote recognizes the manufacturer’s code, the IRsegment blinks twice.You have 10 seconds to press each digit. If it takes longerthan that, the remote “times out” and you must beginagain.NOTE:• Depending on the model and year of manufacture, thisfunction cannot be used for some models, even if the yourdevice is listed on the included list of preset codes.• Some manufacturers use more than one type of remotecontrol code. Refer to the included list of preset codes tochange the number and check it out.2 The preset codes are as follows uponshipment from the factory and after resetting:• TV, VCR .........................................HITACHI• CD, DVD........................................DENON• SAT ................................................RCADVD preset codes41470 (default) 40490DENON Model No.DVD-555DVD-755DVD-900DVD-910DVD-955DVD-1000DVD-1200DVD-1500DVD-1710DVD-1910DVD-2200DVD-2800DVD-2800IIDVD-2900DVD-800DVD-1600DVD-2000DVD-2500DVD-3000DVD-3300DVD-2910DVD-3800DVD-3910DVD-5900DVD-5910DVD-9000DVM-715DVM-1800DVM-1805DVM-1815DVM-2815DVM-4800• For the DVD player remote control buttons, function namesmay differ according to manufacturer. Compare with theremote control operation of the various components.