Denso GT10Q-SR User Manual
Also see for GT10Q-HR: Operator's manual
                                                                                   | |
Contents
|
167.2.1.2 Extracting data blocksIf data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block numbersfrom a code specified by the "Code type" and then outputs it in the data transmission format selected in the scanner (seeChapter 9, Section 9.2). The extraction conditions and data bock numbers are listed below.! Extraction conditionsExtraction conditions ChoicesAny codeQR CodePDFData MatrixMaxiCodeUPC-A/EAN-13UPC-EEAN-8Code 128EAN-128Codabar (NW-7)Code 39Interleaved 2of5 (ITF)RSS"Code type"EAN.UCC Composite symbology"Data transfer regardless of error result" Permit/ProhibitIf the scanner fails to extract a data block or scans a code not specified by "Code type" when the "Data transfer regardlessof error result" is permitted, then it outputs the data read as is without editing.! Data block numbersEach data block number should be within the range from 1 through 99. Up to three blocks can be extracted. |
Related manuals for Denso GT10Q-HR
manualsdatabase
Your AI-powered manual search engine